Germination data from tests of chickweed seeds from chlorsulfuron resistant and sensitive biotypes

data(chickweed)

Format

A data frame with 35 observations on the following 3 variables.

start

a numeric vector of left endpoints of the monitoring intervals

end

a numeric vector of right endpoints of the monitoring intervals

count

a numeric vector of the number of seeds germinated in the interval between start and end

time

a numeric vector of the non-zero left endpoints of the monitoring intervals (often used for recording in practice)

Details

The germination tests of chickweed seeds from chlorsulfuron resistant and sensitive biotypes in central Zealand were done in petri dishes (diameter: 9.0cm) in a dark growth cabinet at a temperature of 5 degrees Celsius. The seeds were incubated for 24 hours in a 0.3% solution of potassium nitrate in order to imbibe seeds prior to the test. A total of 200 seeds were placed on filter plate. After initialization of the tests, the number of germinated seeds was recorded and removed at 34 consecutive inspection times. Definition of a germinated seed was the breakthrough of the seed testa by the radicle.

Chickweed is known to have dormant seeds and therefore we would not expect 100% germination. It means that the upper limit of the proportion germinated has to be incorporated as a parameter into a model, which adequately reflects the experimental design as well as any expectations about the resulting outcome.

Source

Data are kindly provided by Lisa Borggaard (formerly at the Faculty of Life Sciences, University of Copenhagen).

References

Ritz, C., Pipper, C. B. and Streibig, J. C. (2013) Analysis of germination data from agricultural experiments, Europ. J. Agronomy, 45, 1--6.

Examples

# NOT RUN {
library(drc)

## Incorrect analysis using a logistic regression model
## (treating event times as binomial data)
## The argument "type" specifies that binomial data are supplied 
chickweed.m0a <- drm(count/200 ~ time, weights = rep(200, 34),
data = chickweed0, fct = LL.3(), type = "binomial")
summary(chickweed.m0a) # showing a summmary of the model fit (including parameter estimates)

## Incorrect analysis based on nonlinear regression
## LL.3() refers to the three-parameter log-logistic model
## As the argument "type" is not specified it is assumed that the data type
##  is continuous and nonlinear regression based on least squares estimation is carried out
chickweed.m0b <- drm(count/200 ~ time, data = chickweed0, fct = LL.3())
summary(chickweed.m0b)  # showing a summmary of the model fit (including parameter estimates)

## How to re-arrange the data for fitting the event-time model
## (only for illustration of the steps needed for converting a dataset, 
##  but in this case not needed as both datasets are already provided in "drc")
#chickweed <- data.frame(start = c(0, chickweed0$time), end = c(chickweed0$time, Inf)) 
#chickweed$count <- c(0, diff(chickweed0$count), 200 - tail(chickweed0$count, 1))
#head(chickweed)  # showing top 6 lines of the dataset
#tail(chickweed)  # showing bottom 6 lines

## Fitting the event-time model (by specifying the argument type explicitly)
chickweed.m1 <- drm(count~start+end, data = chickweed, fct = LL.3(), type = "event")
summary(chickweed.m1)  # showing a summmary of the model fit (including parameter estimates)

## Summary output with robust standard errors
## library(lmtest)
## library(sandwich)
## coeftest(chickweed.m1, vcov = sandwich)

## Calculating t10, t50, t90 for the distribution of viable seeds
ED(chickweed.m1, c(10, 50, 90))

## Plotting data and fitted regression curve
plot(chickweed.m1, xlab = "Time (hours)", ylab = "Proportion germinated",
xlim=c(0, 340), ylim=c(0, 0.25), log="", lwd=2, cex=1.2)
## Adding the fitted curve obtained using nonlinear regression
plot(chickweed.m0b, add = TRUE, lty = 2, xlim=c(0, 340),
ylim=c(0, 0.25), log="", lwd=2, cex=1.2)
# Note: the event-time model has slightly better fit at the upper limit

## Enhancing the plot (to look like in the reference paper)
abline(h = 0.20011, lty = 3, lwd = 2)
text(-15, 0.21, "Upper limit: d", pos = 4, cex = 1.5)

segments(0,0.1,196,0.1, lty = 3, lwd = 2)
segments(196,0.1, 196, -0.1, lty = 3, lwd = 2)
text(200, -0.004, expression(paste("50% germination: ", t[50])), pos = 4, cex = 1.5)

abline(a = 0.20011/2-0.20011*20.77/4, b = 0.20011*20.77/4/196, lty = 3, lwd = 2)
#text(200, 0.1, expression(paste("Slope: ", b*(-d/(4*t[50])))), pos = 4, cex = 1.5)
text(200, 0.1, expression("Slope: b" %.% "constant"), pos = 4, cex = 1.5)
points(196, 0.1, cex = 2, pch = 0)


## Adding confidence intervals

## Predictions from the event-time model
#coefVec <- coef(chickweed.m1)
#names(coefVec) <- c("b","d","e")
#
#predFct <- function(tival)
#{
#    as.numeric(deltaMethod(coefVec, paste("d/(1+exp(b*(log(",tival,")-log(e))))"), 
#    vcov(chickweed.m1)))
#}
#predFctv <- Vectorize(predFct, "tival")
#
#etpred <- t(predFctv(0:340))
#lines(0:340, etpred[,1]-1.96*etpred[,2], lty=1, lwd=2, col="darkgray")
#lines(0:340, etpred[,1]+1.96*etpred[,2], lty=1, lwd=2, col="darkgray")
#
### Predictions from the nonlinear regression model
#nrpred <- predict(chickweed.m0b, data.frame(time=0:340), interval="confidence")
#lines(0:340, nrpred[,2], lty=2, lwd=2, col="darkgray")
#lines(0:340, nrpred[,3], lty=2, lwd=2, col="darkgray")
# }